Hands-On Electrical Contracting in the North Okanagan
Vernon Electrical Contractors for Homes, Businesses and Builders
From electrical service upgrades and home renovations to commercial construction and ongoing building maintenance, Mass Contracting provides experienced electrical work with direct, hands-on involvement from planning through completion.
Serving the North Okanagan Since 2008
Residential and Commercial Electrical Services
Licensed and Insured
All Permits and Inspections Coordinated
Our Electrical Services
An Electrical Service Upgrade Involves More Than the Panel
Increasing a property’s capacity may require changes to the panel, meter base, service mast, entrance cable, utility connection and other components. Mass Contracting reviews the complete electrical service before recommending what should be repaired or upgraded.
Common reasons for an upgrade
- Renovations or additions
- Secondary suites
- EV charger installation
- Heat pumps
- Hot tubs
- Workshops
- Commercial equipment
- Limited panel capacity
- Aging or damaged service equipment
Hands-On From the First Conversation to the Final Inspection
Experienced Project Review
The electrical requirements are considered before work begins, including capacity, access, project sequencing and coordination requirements.
Direct Communication
Clients, builders and property managers have a clear point of contact throughout the work.
Practical Recommendations
Mass Contracting explains what is required, what options are available and what should be prioritized.
Coordination With the Full Project Team
Electrical work is coordinated with contractors, other trades, inspectors, utilities and property representatives where required.
Completion and Deficiency Follow-Through
The project is reviewed carefully so outstanding items are identified and completed.
An Electrical Subtrade That Understands the Entire Build
Mass Contracting works with builders and general contractors on new homes, renovations, additions and design-build projects.
We help plan the electrical scope around construction schedules, inspections, equipment selections and the work of other trades. From estimating and rough-in to changes, deficiencies and final completion, communication stays clear throughout the project.
We can help with
- Estimating and scope review
- Design-build electrical planning
- Rough-in and finishing
- Project scheduling
- Inspection coordination
- Change management
- Deficiency completion
- Communication with other trades
Commercial Electrical Support That Continues Beyond the Installation
What Clients Say About Working With Mass Contracting
“Mass Contracting handled our service and panel upgrade from the initial assessment through the final inspection. They explained why the upgrade was needed, answered our questions and coordinated the required steps. The project stayed organized, the work area was left clean and everything was completed as discussed.”
Homeowner, Coldstream
“We had an electrical problem that had been happening on and off for months. Mass Contracting took the time to properly troubleshoot it, explained what was causing the issue and completed the repair with minimal disruption to our business. Professional, knowledgeable and easy to deal with from start to finish.”
Commercial Property Manager, Vernon
“Mass Contracting understands how to work as part of a larger construction team. They communicated with us throughout the project, coordinated well with the other trades and brought potential issues to our attention before they affected the schedule. Changes and deficiencies were handled promptly without needing to be chased.”
General Contractor, North Okanagan
Local Experience. Direct Involvement. Work Done Properly.
Mass Contracting is a Vernon-based electrical contractor with 18 years of experience serving homeowners, builders and commercial property owners throughout the North Okanagan.
Led by Kyle, the company provides residential and commercial electrical work, including new construction, renovations, service calls, building maintenance and electrical service upgrades. Kyle also brings experience from the general contracting side of the industry, having been involved in the construction of more than 40 homes. This gives Mass Contracting a practical understanding of how electrical work fits into the entire build.
As a smaller company, Mass Contracting remains directly involved in estimating, planning and completing the work. That hands-on approach helps provide better communication, reliable service and greater accountability from the first conversation through project completion.
The company has grown primarily through word of mouth, with its reputation built on integrity, experience and doing the work properly.
An Electrical Service Upgrade Involves More Than the Panel
Mass Contracting provides residential and commercial electrical services throughout Vernon, Coldstream, Lavington, Lumby, Armstrong and surrounding North Okanagan communities.
Based in Vernon, we work with homeowners, builders and commercial property owners on renovations, new construction, service calls, electrical maintenance and service upgrades.
Our primary service area includes:
Vernon
Coldstream
Lavington
Lumby
Armstrong
Surrounding North Okanagan communities
Projects outside our main service area may still be considered depending on the type of work, project size and location. Contact us with a brief description of the work and the property address, and we will confirm availability.
Frequently Asked Questions
No. A commercial property can begin with a one-time service call, assessment or maintenance visit.
Once Mass Contracting has reviewed the building and its electrical needs, the property representative can decide whether ongoing scheduled maintenance would be useful. This allows the relationship to develop around the actual needs of the property rather than requiring a program before the building has been assessed.
Mass Contracting explains what was found, how it may affect the building and what work is recommended.
Minor items may be addressed during the scheduled visit when they fall within the approved scope. Larger repairs, alterations or upgrades can be documented and planned separately, including any permits or power interruptions that may be required.
Where possible, electrical maintenance can be planned around operating hours, tenant access and the areas of the building being used.
Some testing or repair work may require equipment to be shut down or power to be temporarily disconnected. These requirements are discussed in advance so the property representative can prepare and the disruption can be managed.
The appropriate frequency depends on the building, the electrical equipment, how heavily it is used, its age, operating conditions and any previous problems.
Some properties may benefit from regularly scheduled visits, while others may only require periodic reviews or maintenance tied to particular equipment. Mass Contracting can review the property and recommend a practical schedule.
Certain facilities and electrical systems may also be subject to electrical operating permit and ongoing maintenance requirements in British Columbia. Those requirements depend on the equipment and facility, not simply whether the property is commercial.
The scope is developed around the building rather than using the same checklist for every property.
A program may include reviewing accessible electrical equipment, checking known problem areas, investigating recurring issues and identifying repairs or improvements that should be planned. The findings can then be organized according to their condition, importance and effect on the building.
Mass Contracting provides electrical maintenance and troubleshooting for a range of commercial properties, including offices, retail spaces, shops, service businesses and other occupied buildings.
The type of support available depends on the property, electrical equipment and work required. Contact the team with information about your building so the appropriate scope can be discussed.
Mass Contracting coordinates the electrical installation permit and the required declaration or inspection stages connected to its scope of work.
The team also communicates with the builder about when electrical work is ready for inspection and when the project can move into the next construction stage. Technical Safety BC requires electrical permit holders to declare completed phases and obtain acceptance before concealed rough wiring is covered where applicable.
Construction projects often change as selections are finalized, site conditions are discovered or the owner adjusts part of the design.
Mass Contracting reviews how the change affects the electrical scope, schedule and completed work. The required adjustment can then be discussed with the builder before proceeding.
Yes. Mass Contracting can complete the electrical work from rough-in through final finishing.
Rough-in generally includes concealed wiring, electrical boxes, panels and other components installed before walls and ceilings are covered. Finishing includes fixtures, switches, receptacles, controls, equipment connections and final testing.
Yes. Mass Contracting can help develop the electrical scope around the building plans, room layouts, equipment requirements and intended use of the property.
This can include planning panel locations, lighting, receptacles, dedicated circuits and other electrical requirements that need to be confirmed before rough-in begins.
Yes. Mass Contracting can review completed electrical drawings, specifications and equipment schedules before estimating and beginning the work.
Any questions, missing information or potential conflicts identified during the review can be discussed with the builder or project team before they become larger issues on site.
Electrical involvement should begin early enough to review the plans, service requirements, equipment loads and important layout decisions before construction reaches the rough-in stage.
Early involvement gives the builder time to resolve questions about panel placement, lighting, switches, receptacles, dedicated circuits and utility requirements before those decisions begin affecting framing or other trades.
Yes. Commercial property owners and managers can contact Mass Contracting for preventative maintenance, troubleshooting and call-out support.
Ongoing maintenance is covered through the dedicated commercial building maintenance service rather than the project-based services on this page.
Yes. Mass Contracting coordinates with general contractors, project managers and other trades on commercial construction and improvement projects.
The electrical scope can be planned around the broader project schedule, inspection requirements, equipment selections and the work being completed by others.
Yes. An electrical inspection can help identify visible concerns, aging equipment and conditions that may affect how the property will be used or renovated.
The scope should be established before the inspection so it addresses the client’s reason for requesting it. Mass Contracting explains the findings and identifies areas that may require repair, upgrading or further investigation.
Yes. Lighting can often be upgraded as a standalone project.
The work may involve replacing fixtures, improving light levels, updating controls or changing how specific areas are illuminated. Mass Contracting reviews the existing lighting and how the space is used before recommending the appropriate improvements.
Some projects may be completed in phases, particularly when the building needs to remain operational. BC Hydro currently offers incentives for certain eligible commercial lighting and control upgrades.
Many new electrical installations, alterations and equipment upgrades require an electrical installation permit.
The exact requirements depend on the scope of the work and the authority responsible for the property. Mass Contracting determines what applies to the project and coordinates the electrical permit and required completion process. Technical Safety BC requires regulated electrical work in British Columbia to be completed by authorized individuals working through the appropriate licensing and permit system
An electrician should become involved early enough to review the plans, expected electrical loads, equipment requirements and project schedule before construction reaches the installation stage.
Early involvement helps identify panel capacity, circuit requirements, lighting needs and coordination issues before they cause changes or delays later in the project.
The project schedule can often be planned around access requirements, operating hours and the effect the work may have on employees, tenants or customers.
Some electrical work may require an area to be cleared or power to be temporarily disconnected. Mass Contracting discusses these requirements during planning so the business can prepare and unnecessary disruption can be reduced.
Yes. Mass Contracting provides commercial service and repair work as well as larger installations and construction projects.
This can include troubleshooting electrical problems, repairing circuits, replacing damaged components and adding or modifying electrical connections. The scheduling and project requirements will depend on the nature of the problem and the building involved.
Yes. An electrical inspection can help identify visible concerns, aging equipment, damaged components and areas that may require further investigation.
This can be useful before purchasing a home, planning a renovation, adding new electrical loads or addressing concerns raised by an insurer. Mass Contracting explains the findings and helps prioritize any recommended repairs or upgrades.
Many residential electrical installations, alterations and upgrades require an electrical permit and inspection.
The exact requirements depend on the type and scope of the work. Mass Contracting can explain what applies to the project and coordinate the required electrical permit and inspection process where needed.
That depends on the charger, the home’s current electrical demand and the available capacity in the existing service and panel.
Mass Contracting reviews the electrical system and proposed charger before recommending the installation. Some homes may have enough available capacity, while others may require load management, a dedicated circuit or an electrical service upgrade.
An electrician should be involved as early as possible, ideally before walls are opened or the final layout is confirmed.
Early electrical planning helps identify circuit requirements, lighting locations, appliance loads, panel capacity and any work that may affect the renovation schedule. It also allows the electrical scope to be coordinated with the contractor and other trades before installation begins.
Yes. Intermittent electrical problems can be more difficult to diagnose because the issue may not be active when the electrician arrives.
Mass Contracting reviews when the problem occurs, what equipment or circuits are affected and any patterns the homeowner has noticed. From there, the system can be tested to help identify the likely cause and the appropriate repair.
Yes. Mass Contracting provides residential service work ranging from troubleshooting a single electrical concern to completing larger renovation and addition projects.
The scope of the work will determine the scheduling, permitting and planning required, but smaller repairs and installations are still approached with the same attention to safety and workmanship.
Yes. Existing concerns may become visible during the assessment or installation and may need to be corrected before the service can be approved and reconnected.
Mass Contracting coordinates the electrical permit, inspection requirements and the electrical work connected to the utility service.
Not automatically. A new panel can be installed at the same amperage as the existing equipment.
Yes. Work on the main service equipment requires a planned power interruption. The expected process will be reviewed before installation.
No. The existing electrical demand, charger requirements and available capacity should be assessed before deciding whether a service upgrade is necessary.
The main breaker may indicate the panel rating, but an electrician should confirm the complete service and available capacity.
Mass Contracting primarily serves Vernon, Coldstream, Lavington, Lumby, Armstrong and surrounding North Okanagan communities.
Project availability may depend on the service type, location and current schedule. Larger construction and commercial projects may be considered across a broader area, while smaller service calls may have a more limited travel radius.
Permit and inspection responsibilities depend on the type of work and how the overall project is being managed.
Mass Contracting will explain which electrical permits and inspections are required for the contracted electrical scope and who is responsible for each step. On builder-led projects, this process may also be coordinated with the general contractor and overall construction schedule.
Any responsibilities involving the utility provider, other professionals or separate building permits will be clarified before work begins
Yes. Mass Contracting provides troubleshooting, repairs and planned electrical maintenance for commercial properties.
Ongoing support may include recurring electrical concerns, lighting repairs, equipment connections, safety-related corrections and planned building improvements. Maintenance arrangements can be discussed based on the property, anticipated service needs and desired response process.
Yes. Mass Contracting works as an electrical subtrade for builders and general contractors on new homes, renovations, additions and design-build projects.
Our involvement can include estimating, scope review, electrical planning, rough-in, finishing, inspection coordination, change documentation and deficiency completion. We also coordinate with other trades when electrical work affects mechanical equipment, cabinetry, lighting layouts or other building components.
Yes. Mass Contracting can assess the existing electrical service and discuss whether a 200 amp upgrade is necessary or appropriate.
The recommendation depends on more than the size of the home. We also consider the existing electrical load, heating systems, major appliances, accessory buildings and planned additions such as air conditioning, a hot tub, an electric vehicle charger or a secondary suite.
Not every property automatically requires 200 amp service. The goal is to understand the expected electrical demand and recommend an option that supports the property safely and practically.
An electrical service upgrade may involve replacing or increasing the capacity of the electrical service, installing a new panel, updating grounding and bonding, coordinating utility requirements and completing the work necessary for inspection and reconnection.
The exact scope depends on the existing service, the condition of the equipment, the property layout and the reason for the upgrade. A site assessment is normally required before the full scope and cost can be confirmed.
Yes. Mass Contracting handles many types of electrical repairs, troubleshooting and service work.
Availability may depend on the location, urgency and nature of the issue. When contacting us, describe what is happening, when the problem began and whether any part of the electrical system has stopped working completely. Photos of the panel, affected equipment or damaged components may also help us understand the situation.
Mass Contracting works on residential construction, renovations, additions, electrical service upgrades, commercial projects, tenant improvements, maintenance and troubleshooting. We support homeowners, builders, general contractors, property owners and commercial clients.
The best way to determine whether a project is a good fit is to provide the property location, the type of work being planned and the desired timeline.
Tell Us About Your Electrical Project
Whether you are upgrading an electrical service, renovating a home, planning a commercial project or looking for a dependable electrical subcontractor, send Mass Contracting the project details to get started.